招聘网站的岗位分析系统设计与实现

随着高校扩招，应届毕业生人数逐年增长，就业压力不容小觑。针对就业难的问题，进行招聘网站数据分析，挖 掘出岗位所需技能，再结合学生在校时所学课程，二者对比，就能很好地给学生推荐合适的工作，并且给学校专业人才培养方 案中的岗位职业定位     

基于CDIO工程教育的应用型人才培养 理论与实践研究 — —以红外多路遥控系统设计为例

The construction of specialty groups in higher vocational colleges is in full swing. However, due to the cognitive bias and the lack of construction paradigm for reference, the construction of specialty groups is still in the period of "crossing the river by feeling the stones" with different opinions. There are some problems in the construction of specialty groups, such as unclear under- standing of the concept of specialty groups, unreasonable logic of groups, unclear construction of groups, and nonstandard manage- ment of groups. This paper describes the specific content of the construction of modern information technology specialty group based on the Sydney Agreement, hoping to form a reference paradigm for the construction of specialty group of similar colleges and universities.     

Analytical study of surface wave multiple refraction in boundary of a scalar impedance surface with a tensor impedance surface

In this paper, the multiple refraction phenomenon is investigated on the boundary of a scalar impedance surface (SIS) and a tensor impedance surface (TIS). When a surface wave (SW) propagates on the SIS and radiates to the boundary of the TIS, the propagation direction of it is changed and the refraction phenomenon is accrued. The method that is proposed in this paper can predict the multiple refraction for the SW. Moreover, another analytical method is introduced for designing the proposed structure which the double refraction (DR) occurs at arbitrary angles on it. Using it, a sample of the structure is designed by printed circuits in 15.2GHz and the results are verified by the full‐wave simulation and measurement. The results are shown that in the structure, DR is occurred in 2° and 22° as predicted. The proposed method can provide many applications such as design of SW power dividers based on the TISs, impedance surface based waveguides, holographic antennas, and feeding of array antennas.     

基于传统清管球接收器的滤杂防堵工艺设计

清管球回收操作过程中,清管球接收器的泄压、排液和惰化导致泥、砂、垢等杂质积聚在清管球接收器中,并随油气物流进入闭排系统管线,造成杂质流失、闭排系统管线堵塞和压力无法完全释放,影响对海底油气管道腐蚀、析蜡、结垢及地层出砂等情况的判断,存在很大的安全隐患。通过对清管球接收器实施工艺改造,使清管球接收器具备滤杂防堵功能和自动取样功能,有效解决了闭排管线堵塞、杂质流失和安全隐患问题。该工艺研究对于海上油气田海底管线的运营和维护具有较高的借鉴意义。     

柠檬酸铋合成新工艺研究

针对现有柠檬酸铋制备工艺合成时间长、能耗高、产品纯度不高等不足,介绍了一种常温下制备柠檬酸铋的新工艺。新工艺制备时间短,制备的柠檬酸铋产品质量好,合成过程产生的废水可循环利用,废气经碱液循环吸收可生产硝酸钠副产品。     

页岩气地质评价关键实验技术的进展与展望

页岩气地质评价实验结果为页岩气地质"甜点"评价、地质选区、储量计算、水平井压裂层段优选及开发方案确定等提供了重要的数据基础与科学依据。近年来,随着我国页岩气勘探开发工作的不断深入,相关地质评价实验技术也取得了较大的进展。特别是在页岩微观孔隙结构、含气性和物性这3个方面,通过引进先进技术与自主设备研发相结合,建立了适用于我国海相页岩的分析测试技术和标准,对于推动我国页岩气的勘探开发进程发挥了重要的作用。为了给我国页岩气基础地质研究、实验室建设及相关标准制定提供参考和指导,归纳总结了国内外在上述3项页岩气地质评价关键实验技术方面所取得的进展,并对相关技术未来的发展趋势进行了展望。研究结果表明:①对于页岩微观孔隙结构测试,目前已经形成了多种手段相结合的定性观测和定量表征测试方法,实现了由静态表征向动态表征的转化,未来需要在页岩孔隙结构的原位表征和孔内流体赋存特征直接观测等方面做进一步的研究;②对于页岩含气性测试,目前已经建立了现场与室内相结合的含气性定量表征系列技术,实现了对页岩吸附气和游离气赋存特征的定量评价,未来需要在深层页岩损失气量计算、页岩气吸附机理及模型等方面做进一步的研究;③对于页岩物性测试,目前已经建立了多种方法相结合的孔隙度和渗透率测试技术,实现了对页岩孔隙有效性的定量评价,未来需要在孔隙度测试条件和方法等方面进行对比研究并统一标准。结论认为,只有不断地改进和优化页岩气地质评价实验技术,才能够满足科研与生产的需求。     

大涡模拟Smagorinsky模型用于磨粒流精密加工喷嘴的质量控制研究

为研究固液两相磨粒流加工喷嘴小孔过程中的流场分布、涡旋形成规律及涡旋的存在对磨粒流加工的影响机制，采用Smagorinsky亚格子模型对磨粒流加工喷嘴小孔的流道进行大涡数值模拟，并使用磨粒流对变直径喷嘴工件进行加工试验。数值模拟发现磨粒流流体中磨粒与壁面的碰撞与剪切作用随流体的速度增大而增大，同一截面的速度存在速度差，其中还伴随涡旋的存在；通过试验研究发现：经固液两相磨粒流加工后的喷嘴小孔表面质量得到明显提高，喷嘴经过四次不同入口速度的磨粒流加工后大孔处表面粗糙度Ra由1.24 μm降至0.542 μm，小孔处表面粗糙度Ra由1.21 μm降至0.437 μm。结论显示固液两相磨粒流加工技术可有效提高被加工喷嘴工件的内表面质量，加工时同一截面的速度存在速度差，速度差的存在利于涡旋的形成，涡旋的存在利于提高磨粒流加工过程的剪切作用，有助于获得高质量的喷嘴小孔内通道表面。     

Characterisation of the microplasma spraying of biocompatible coating of titanium

This paper presents new results of studying the influence of parameters of microplasma spraying (MPS) of Ti wire on the structure and properties of Ti coatings. Based on the design of the experiment and the results of the SEM study, certain spraying modes were chosen to form the desired composition and structure of the Ti coating.  The dense sublayer (up to 300 µm thick) provides good adhesion to the substrate, and a porous top layer can accelerate the coated implant ingrowth with the bone.  This technology is developed for the manufacture of coated endoprosthesis implants.     

1226工作面切顶卸压沿空成巷技术应用研究

为解决掘进成本较高、接替紧张等问题,基于1226工作面地质条件,对运输巷进行切顶卸压沿空留巷设计,主要包括切顶预裂缝、恒阻大变形锚索和巷道支护参数的设计,取得较好效果。     

响应面曲线法优化贵州某磷块岩浮选工艺研究

对贵州某沉积钙质磷块岩进行了浮选工艺研究。采用H₂SO₄为氟磷灰石抑制剂、BW-1为白云石捕收剂,进行了浮选单因素试验; 在此基础上进行了正交试验,并采用响应面曲线法进行了浮选条件优化。确定了最佳浮选条件为: 磨矿细度-0.074 mm粒级占60%、H₂SO₄用量13.20 kg/t和BW-1用量400 g/t。采用一段反浮选试验流程,可得到精矿品位30.94%、回收率92.45%的磷精矿。研究结果表明,磨矿细度与H₂SO₄用量的交互作用对精矿品位影响显著,H₂SO₄用量和BW-1用量的交互作用对精矿回收率影响显著。